Guernsey Airport is located on the island of Guernsey and is 2.5nm south west of St Peter Port

CallsignFrequency
Guernsey Ground121.800
Guernsey Tower119.950
Guernsey Approach128.650
Guernsey Radar124.500

VFR traffic and any inbounds when Jersey Control is closed should contact Guernsey Approach

Runway 27 is the preferential runway when there is a tailwind component of 5 knots or less and the runway is dry

The taxiway chart can be viewed here

RunwayFrequencyIdentifier
09108.1IUY
27109.4IGH
RunwayInitial Fix
09RUTOK (North)
REMLO (West)
ABDUS (South)
27OTMIS (North)
PELOM (East)
AMIBA (South)
SIDInitial Altitude
LERAK1F3000 feet
ORIST1F4000 feet
DIN2E3000 feet
LUSIT1E3000 feet
ORVAL1E3000 feel
GULDA1E3000 feet
ORTAC3E4000 feet
SKERY3E4000 feet

SIDInitial Altitude
LERAK1X3000 feet
ORIST1X4000 feet
DIN2W3000 feet
LUSIT1W3000 feet
ORVAL1W3000 feet
GULDA1E3000 feet
ORTAC3W4000 feet
SKERY3W4000 feet
STARInitial FixRouteExpected Descent
ALD1GALDALD – GUR
BIGNO1GBIGNOBIGNO – GUR
LELNA1BLELNALELNA – BRILL – GURFL200 level by LELNA
LELNA1VLELNALELNA – EVKEX – GURFL200 level by LELNA
ORTAC1BORTACORTAC – BRILL – GUR
ORTAC1VORTACORTAC – EVKEX – GUR
SKERY1GSKERYSKERY – GUR
BEVAV1GBEVAVBEVAV – OYSTA – GUR
DIN1GDINDIN – GUR

You can view the VRP chart here

Holding AreaDirection of turn
GUR088 degrees left hand

Omnidirectional departures are used for inter-island IFR flights the altitude restrictions are detailed below

Flights are at an altitude of 3000 feet

Flights are at an altitude of 2000 feet

Flights are at an altitude not above 1000 feet

Runway 09 departures

Omnidirectional departures from runway 09 must after departure climb straight ahead on track 089 degrees to 850 feet above mean sea level, then turn on track climbing to en-route safety altitude or in accordance with ATC clearance

Runway 27 departures

Omnidirectional departures from runway 27 must after departure climb straight ahead on track 269 degrees to 850 feet above mean sea level, then turn on track climbing to en-route safety altitude or in accordance with ATC clearance

Below is the order in which you should contact a controller

Vatsim

EGJB_GND, EGJB_TWR, EGJB_APP, EGJJ_C_APP, LON_W_CTR, LON_CTR


0 Comments

Leave a Reply

Avatar placeholder
[]